Manualshelf

Quick Installation Guide

ManualsBrandsEdimax ManualsComputers & Accessories2 x 2 AC Dual-Band Outdoor PoE Access Point
11121314151617181920
11
6. Edit the new extended SSID according to your preference and enter the
security details for the source SSID (e.g. Pre-shared Key). Click “Connect”
to proceed.
Wait for the configuration to take effect:
7. The device (now in Repeater Mode) will establish a connection to the
source SSID and repeat the extended SSID. The device will become a
DHCP client of the router/root AP. Switch your computer back to
dynamic IP address.
8. To access the web user interface, check your router/root AP’s settings
to determine the device’s new IP address. Enter the new IP address into
the browser for the web user interface.
If you wish to switch the operation mode, please reset the device to
factory default (via web user interface or hardware reset).