Quick Installation Guide

6. Edit according to your preference and enter the security details for the

source SSID (e.g. Pre-shared Key). Click “Connect” to proceed.

Wait for the configuration to take effect:

7. The device (now in Client Bridge Mode) will receive wireless signal and

provides it to devices connected to the bridge via Ethernet cable. The

device will become a DHCP client of the router/root AP. Switch your

computer back to dynamic IP address.

8. To access the web user interface, check your router/root AP’s settings

to determine the device’s new IP address. Enter the new IP address into

the browser for the web user interface.

If you wish to switch the operation mode, please reset the device to

factory default (via web user interface or hardware reset).