User Manual

100
IV-6 Operation Mode
The access point can function in five different modes. Set the operation mode
of the access point here.
1. AP Mode: The device acts as a standalone access point
2. Repeater Mode: The device acts as a wireless repeater (also called wireless
range extender) that takes an existing signal from a wireless router or
wireless access point and rebroadcasts it to create a second network.
3. Managed AP Mode: The device acts as a slave AP within an AP array.
4. Client Bridge Mode: The device is now a client bridge. The client bridge
receives wireless signal and provides it to devices connected to the bridge
(via Ethernet cable).
In Managed AP mode some functions of the access point will be disabled
in this user interface and must be set using Edimax Pro NMS on the AP
Controller.
Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.