User Manual

46
Auto
Channel
Range
Select a range to which auto channel selection can choose
from.
Auto
Channel
Interval
Select a time interval for how often the auto channel setting
will check/reassign the wireless channel.
Check/uncheck the “Change channel even if clients are
connected” box according to your preference.
Channel
Bandwidth
Select the channel bandwidth:
20MHz (lower performance but less interference); or
40MHz (higher performance but potentially higher
interference); or
Auto (automatically select based on interference level).
BSS
BasicRateSet
Set a Basic Service Set (BSS) rate: this is a series of rates to
control communication frames for wireless clients.
When auto channel is disabled, configurable fields will change. Select a
wireless channel manually:
Channel
Select a wireless channel from 1 – 11.
Channel
Bandwidth
Set the channel bandwidth:
20MHz (lower performance but less interference); or
40MHz (higher performance but potentially higher
interference); or
Auto (automatically select based on interference level).
BSS
BasicRateSet
Set a Basic Service Set (BSS) rate: this is a series of rates to
control communication frames for wireless clients.
Press “Apply” to apply the configuration, or “Cancel” to forfeit the changes.