User Manual

IV-3-3 WPS

Wi-Fi Protected Setup is a simple way to establish connections between WPS

compatible devices. WPS can be activated on compatible devices by pushing a

WPS button on the compatible device or from within the compatible device’s

firmware / configuration interface (known as PBC or “Push Button

Configuration”). When WPS is activated in the correct manner and at the

correct time for two compatible devices, they will automatically connect. “PIN

code WPS” is a variation of PBC which includes the additional use of a PIN

code between the two devices for verification.

Please refer to manufacturer’s instructions for your other WPS device.

WPS

Check/uncheck this box to enable/disable WPS functionality.

Press “Apply” to apply the settings.

WPS must be disabled when using MAC-RADIUS

authentication (see IV-3-4 RADIUS).

Press “Apply” to apply the configuration.