User Manual

73
IV-3-4-2 Internal Server
The access point features a built-in RADIUS server which can be configured as
shown below used when “Internal” is selected for “RADIUS Type” in the
“Wireless Settings”  “RADIUS”  “RADIUS Settings” menu.
To use RADIUS servers, go to “Wireless Settings”  “Security” and select
“MAC RADIUS Authentication”  “Additional Authentication” and select
“MAC RADIUS Authentication” (see IV-3-1-3 & IV-3-2-3).
Internal Server
Check/uncheck to enable/disable the access point’s internal
RADIUS server.
EAP Internal
Authentication
Select EAP internal authentication type from the drop down
menu.
EAP Certificate
File Format
Displays the EAP certificate file format: PCK#12(*.pfx/*.p12)
EAP Certificate
File
Click “Upload” to open a new window and select the location
of an EAP certificate file to use. If no certificate file is
uploaded, the internal RADIUS server will use a self-made
certificate.
Shared Secret
Enter a shared secret/password for use between the internal
RADIUS server and RADIUS client. The shared secret should
be 1 – 99 characters in length. This should match the
“MAC-RADIUS” password used in IV-3-1-3 or IV-3-2-3.