User Manual

77
IV-3-5 MAC Filter
MAC filtering is a security feature that can help to prevent unauthorized users
from connecting to your access point.
This function allows you to define a list of network devices permitted to
connect to the access point. Devices are each identified by their unique MAC
address. If a device which is not on the list of permitted MAC addresses
attempts to connect to the access point, it will be denied.
To enable MAC filtering, go to “Wireless Settings”  “2.4G
Hz 11bgn”  “Security”  “Additional Authentication” and select “MAC
Filter” (see IV-3-1-3 or IV-3-2-3).
The MAC address filtering table is displayed below: