Quick Installation Guide

16
SSID
Enter an SSID name for the guest network.
Hide SSID
Enable: the SSID will be hidden. Clients must manually enter
the SSID in order to connect.
Disable: the SSID will be visible (default)
Encryption
Select from WPA/WPA2-PSK, WPA2-PSK, WPA-PSK or None.
Type
Select “TKIP/AES”, “TKIP” or “AES” encryption type.
The “TKIP/AES” is the default encryption type.
WiFi Password
Please enter a Wi-Fi password.
Bandwidth Limit
This function limits the aggregated speed of the entire SSID.
When enabled, Downlink and Uplink fields will become available. Enter a
value for each field.
Guest Access
Access:
Internet Only
Guests have Internet access only (Default Setting).
Full Access
Guests have full access to your network.
Access
Gateway
Your router’s IP address and subnet mask.
Office 1-2-3 will automatically get the Gateway data from the router.
Additional Access IP
Additional
Access IP
If you have devices (e.g. printer, scanner, etc.) that are
within the network and wish these to be made available to
the guests, select Allow in the “Action” column. Enter Device
Names, IP Addresses and Subnet Masks.