User Manual

Office 1-2-3 Interface
122
Each Managed AP Group has “Action” icons with the following functions:
1. Disallow
Remove the Managed AP Group from the AP array and disable
connectivity.
2. Edit
Edit various settings for the Managed AP Group.
3. Blink LED
The LED of all Managed APs in the group will flash temporarily to help
identify & locate the access points.
4. Buzzer
The buzzer of all Managed APs in the group will sound temporarily to
help identify & locate the access points.
5. Network Connectivity
Go to the “Network Connectivity” panel to perform a ping or traceroute.
6. Restart
Restarts all Managed APs in the group.
Status Icons
Icon
Color
Status
Definition
Grey
Disconnected
Managed AP group is disconnected. Please
check the network connection and ensure
the group is in the same IP subnet as the
Master AP.
Red
Authentication
Failed
Or
Incompatible
System security must be the same for all
access points in the AP array. Please check
security settings.
All access points must have the same
firmware version. Please use the Master