User Manual

Office 1-2-3 Interface
85
TELNET
Client terminal with telnet protocol management interface
Date and Time Settings
Local Time
Set the system’s date and time manually using the drop
down menus.
Acquire
Current Time
from your PC
Click to acquire time and date automatically from your PC.
Use NTP
Check to enable automatic time and date sync to an NTP
server.
Auto Daylight
Saving
Check / uncheck to enable / disable daylight saving function.
Server Name
Use the drop down menu to select a region. A server will be
shown after selecting the region. Choose the region
according to your location.
Update
Interval
Specify how often (in hours) the access point synchronizes
with the NTP server.
Time Zone
Select the time zone of your country/region. If your
country/region is not listed, please select another
country/region whose time zone is the same as yours.
Syslog Server Settings
Transfer Logs
Check the box to enable the use of a syslog server, where
system logs are sent to the designated server.
Enter a host name, domain or IP address for the server,
consisting of up to 128 alphanumeric characters.
Syslog E-mail Settings
E-mail Logs
Check the box to enable/disable e-mail logs.
E-mail Subject
Specify the subject line of log emails.
SMTP Server
Address
Specify the SMTP server address used to send log emails.
SMTP Server
Port
Specify the SMTP server port used to send log emails.
Sender E-mail
Specify the sender email address.
Receiver
Specify the email to receive log emails.