User manual

Browser Based Configuration Interface

After you have setup the RA21S as detailed in II. Installation or the included

Quick Installation Guide, you can use the browser based configuration

interface to configure advanced settings.

Please ensure that your computer is set to use a dynamic IP

address. Refer to IV-1. Configuring your IP address for more

information.

III-1. Login

1. To access the browser based configuration interface enter

http://edimax.setup into the URL bar of a browser on a network device

connected to the same Wi-Fi network as the RA21S.

If you can not access http://edimax.setup, connect the device to a

computer using an Ethernet cable and try again.

2. You will be prompted for a username and password. The default

username is “admin” and the default password is “1234”.