Operation Manual

9
Each RE11S can function in one of three modes. To use roaming, setup your
master extender in Wi-Fi Extender or Wi-Fi Access Point mode.
Please ensure your router’s DHCP server is enabled. For most routers this is
enabled by default. If your DHCP server is disabled, you will need to assign
an IP address to your extenders. Refer to the user manual for more help.
Additional (slave) extenders will automatically be set to Wi-Fi Extender mode
via the WPS button. (See I-5. Add Another RE11S To Your Network)
Wi-Fi Extender
The device connects wirelessly to your existing network
and repeats the wireless signal.
Location: The best location for your extender is roughly
in the middle between your existing wireless
router/access point and the dead zone. The extender
needs to receive a good Wi-Fi signal from your
router/access point.
Wi-Fi Access
Point
The device connects to an existing router via Ethernet
cable and provides wireless Internet access for your
network devices.
Location: Connected to your router via Ethernet cable.
Wi-Fi Bridge
(Wi-Fi
Adapter)
The device connects to an Ethernet device such as a
games console or smart TV via Ethernet cable and
provides wireless Internet access for that device.
Location: Within Wi-Fi coverage, close to your wired
network device.
Extender Mode