Operation Manual

If you cannot access http://edimaxext.setup, please make sure

your computer is set to use a dynamic IP address. For more

information please refer to the user manual.

5. Select Yes, I need a Range Extender to continue setup as a Wi-Fi extender

or Change to a Different Mode to set up a different mode.

6. Follow the on-screen instructions for your selected mode to complete

setup. You can configure the product for 2.4 GHz or 5GHz Wi-Fi.

7. See I-5. Add Another RE11S To Your Network to add a second extender.

To switch devices between “master” and “slaves”, unplug any Ethernet

cables and reset the devices back to factory defaults and then setup again.

Extenders in AP mode will use different SSIDs than each other.

For more advanced configurations, use the browser based

configuration interface at http://edimaxext.setup