Operation Manual

39
III-3-4. 2.4GHz Wireless & 5GHz Wireless
The “2.4GHz Wireless” & “5GHz Wireless” menu allows
you to configure SSID and security settings for your
Wi-Fi network along with a guest Wi-Fi network. WPS,
and access control (in access point mode) functions can
also be managed from here.
In Access Point mode, the “Guest” feature in the menu is replaced
by “Access Control”.
III-3-4-1. Basic
The “Basic” screen displays settings for your primary 2.4GHz or 5GHz Wi-Fi
network.
Band
Displays the wireless standard used for the
RE11S’s “2.4GHz (B+G+N)” means that
802.11b, 802.11g, and 802.11n wireless
clients can connect to the RE11S.
Wireless Network
Name (SSID)
This is the name of your Wi-Fi network for
identification, also sometimes referred to as
“SSID”. The SSID can consist of any
combination of up to 32 alphanumerical
characters.
Hide SSID
Enable or disable hide SSID. When disabled,
the SSID will be visible to clients as an
available Wi-Fi network. When enabled, the
SSID will not be visible as an available Wi-Fi
network to clients – clients must manually