Operation Manual

4
I-4. Switch
The RE11S includes a hardware switch on
the underside of the device which can
switch between normal, green mode and
sleep mode as shown in the table below.
“Wi-Fi power” refers to the strength of
the extender’s wireless radio signal (Tx).
If you are using the extender in a small or
medium sized space, you may not need the full power of the wireless radio.
Try it, and determine if you still have sufficient Wi-Fi coverage using green
mode. If so, you can save some energy.
Mode
Switch Position
Description
Normal
Top
100% Wi-Fi power
Green Mode
Middle
25% Wi-Fi power
Sleep Mode
Bottom
Wi-Fi & LEDs off &
Disable Ethernet
Port
Tx power can also be adjusted using the web-based U.I.
(Administration  Wireless). Set the switch to “Normal”
before adjusting the Tx value in the web-based U.I.