Operation Manual

I-5. Add Another RE11S To Your Network

If you already have a master extender set up, then adding another RE11S

extender to your network is easy with the WPS button. New extenders

automatically follow the Wi-Fi settings of the master RE11S linked to your

router.

If you don’t already have a master extender set up, follow the next chapter

II. Master Installation and first install a master instead.

1. Press the WPS button on your master

extender for 3 seconds.

2. Within two minutes, press and hold the

WPS button for 3 seconds on the new

extender you would like to add. The

extender’s green WPS LED should flash to

indicate that WPS is in progress.

3. Please wait while the devices will establish

a connection. This can take up to 2

minutes.

4. Both extenders’ green WPS LED should display on for 30 seconds to

indicate a successful connection. (If not, please restart each device and try

again).