Edimax Gemini Home Wi-Fi Roaming Upgrade Kit RE11 Quick Installation Guide 1. 07-2017 / v4.
. Package Contents RE11S (2pcs) Access Key Card 3. Antenna (4pcs) Ethernet Cable CD with multi-language QIG & Quick installation guide (QIG) user manual RE11S overview ① ② ③ ④ ⑤ ⑥ ⑦ ① ② ③ ④ Signal 5GHz LED Signal 2.
4.
6. Installation 6.1 Scenario A Setting RE11S as AP Mode / Extender Mode combination to extend wireless coverage in the middle of the house Step 1: Power up the master RE11S Power up the RE11S by plugging it into a power socket and wait for the Power LED to turn on. Step 2: Set the master RE11S into AP Mode: 1. Connect the RE11S to the LAN router using their respective LAN port. 2. Wait for the connection status of 5G and 2.4G connections (Both LED turned on). 3.
Step 3: Set the second RE11S into Extender Mode: 1. Power up the second RE11S by plugging it into a power socket near the master RE11S and wait for the Power LED to turn on. 2. Press and hold the WPS button of the master RE11S for 3 seconds. 3. Within 2 minutes, press and hold the WPS button of the second RE11S. Both 5G and 2.4G LED should be flashing initially. 4. The setup is complete if either a) only one of the LED flashes, or b) only one of the LED stays turned on.
.2 Scenario B Setting both RE11S into AP mode to extend wireless coverage in a house Step 1: Power up the master RE11S Power up the RE11S by plugging it into a power socket and wait for the Power LED to turn on. Step 2: Set the master RE11S into AP Mode: 1. Connect the RE11S to the LAN router using their respective LAN port. 2. Wait for the connection status of 5G and 2.4G connections (Both LED turned on). 3. Connect a wireless device to RE11S to confirm internet connectivity.
Step 3: Set the second RE11S into AP Mode: 1. Power up the second RE11S by plugging it into a power socket and wait for the Power LED to turn on. 2. Connect the RE11S to the LAN router using their respective LAN port. 3. Wait for the connection status of 5G and 2.4G connections (Both LED turned on). Congratulations! The Home Wi-Fi system setup is completed! Each user will only require one network name and password for your Wi-Fi system.
Frequently Asked Questions (FAQ) 1. I can’t see the login page after entering http://edimaxext.setup in the browser, what can I do? A: To correct the situation, please try any of the following methods: - Try and make sure your computer is connected to the RE11S wireless network. - Try and make sure your computer is configured as “Obtain an IP Address Automatically” and “Obtain DNS Server Address Automatically”. 2. I can’t access RE11S anymore.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2006/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2006/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2006/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: Model No.: AC1200 Wi-Fi Roaming Mesh Extender RE11S The following European standards for essential requirements have been followed: Spectrum: ETSI EN 300 328 V1.9.1 ETSI EN 301 893 V1.8.1 EMC: EN 301 489-1 V1.9.2 (2011-09); EN 301 489-17 V2.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
