Quick Installation Guide

6.2 Scenario B

Step 1: Power up the master RE11S

Power up the RE11S by plugging it into a power

socket and wait for the Power LED to turn on.

Step 2: Set the master RE11S into AP Mode:

1. Connect the RE11S to the LAN router using their respective LAN

port.

2. Wait for the connection status of 5G and 2.4G connections (Both

LED turned on).

3. Connect a wireless device to RE11S to confirm internet

connectivity.

NOTE: The Wi-Fi username and

password can be found on the

Access Key Card in the package.

Example:

Setting both RE11S into AP mode to extend wireless

coverage in a house