Quick Installation Guide

3
I-3. LED Status
All LEDs are disabled in sleep mode. The best signal strength is
60 – 80% since above 80% is likely too close to your router for the
extender to be effective.
LED
Color
Status
Description
Signal 5GHz
Blue
On
Excellent location.
Signal strength: 60 – 80%
Slow Flashing
Good location.
Signal strength: 40 – 60% & 80 - 100%
Quick Flashing
Poor location.
Signal strength: Below 40%
Off
No signal detected.
Signal 2.4GHz
Blue
On
Excellent location.
Signal strength: 60 – 80%
Slow Flashing
Good location.
Signal strength: 40 – 60% & 80 - 100%
Quick Flashing
Poor location.
Signal strength: Below 40%
Off
No signal detected.
Roaming
Status
Green
On
Extender is a master device.
Flashing
Syncing data.
Off
Extender is a slave device.
Power
Green
On
Extender is on.
Flashing
Resetting to factory default settings,
or system is booting up.
Off
Extender is off.
WPS
Green
On
WPS connection established (LED will
remain on for 30 seconds to indicate
a successful connection).
Flashing
WPS in progress (waiting for another
WPS device).
Off
No WPS in progress.
LAN
Green
On
LAN port connected.
Off
LAN port not connected.