Quick Installation Guide

5
II. Add Your RE11S To Your Network
Adding your RE11S extender to your network is easy with the WPS button.
New extenders automatically follow the Wi-Fi settings of the master RE11S
linked to your router.
If you don’t already have a master extender set up, follow the next chapter
III. Master Installation and install a master instead.
1. Press the WPS button on your master
extender for 3 seconds.
2. Within two minutes, press and hold the
WPS button for 3 seconds on the new
extender you would like to add (within
range of your master extender). The
extender’s green WPS LED should flash to
indicate that WPS is in progress.
3. Please wait while the devices will establish
a connection. This can take up to 2
minutes.
4. Both extenders’ green WPS LED should display on for 30 seconds to
indicate a successful connection. (If not, please restart each device and try
again). Roaming will be available automatically.