Edimax Gemini Home Roaming Wi-Fi Extender RE23S Quick Installation Guide 08-2017 / v1.
1. Package Contents RE23S Access Key Card 2.
. LED Explanation Icon LED Wireless Power WPS Reset 4.
5. Installation Select and follow the installation instructions according to your desired setup. 5.1 Setup RE23S as an Access Point Scenario 1: You are using a General Router With this setup, users can enjoy extended coverage around the house. The Access Point has to be setup to with a separate wireless name and connection password just like your router. Please refer to the user manual to setup a network name and password for RE23S.
Scenario 2: You are using an Edimax Roaming Router Once RE23S is connected to the Edimax Roaming Router (e.g. Edimax RG21S Roaming Router), devices can enjoy seamless connection within the wireless coverage with ONE network name and password. Step 1: Power up RE23S Power up the RE23S by plugging it into a power socket and wait for the Power LED to turn on. Step 2: Set RE23S as an Access Point: 1. Connect the RE23S to the LAN router using their respective LAN port. 2.
5.2 Setup RE23S as an Extender Scenario 3: You are using a General Router With this setup, users can enjoy extended coverage around the house. The Extender has to be setup to with a separate wireless name and connection password just like your router. Please refer to the user manual to setup a network name and password for RE23S. Step 1: Power up RE23S Power up the RE23S by plugging it into a power socket near the Wi-Fi router and wait for the Power LED to turn on.
Step 2 option B: Set RE23S as an Extender using IQ setup: 1. Connect a Wi-Fi capable device to the RE23S: Search for the SSID Edimax_**_** and enter the password. (The Wi-Fi SSID and password are printed on the Access Key Card). Note: If you cannot 2. Open a web browser and enter the URL http://edimax.setup or scan the QR-Code on the right and click Get Started. 3. Select Yes, I need a Wi-Fi Extender to continue setup, as shown in the picture below: access http://edimax.
Step 3: Relocate the RE23S 1. Please relocate the RE23S to achieve the desired coverage. 2. Observe the Wi-Fi LED behavior to determine whether the location is appropriate. For maximum coverage, relocate the RE23S to where signal strength is at Good Performance (less overlapping with the Wi-Fi Router).
Scenario 4: You are using an Edimax Roaming Router Once RE23S is connected to the Edimax Roaming Router (e.g. Edimax RG21S Roaming Router), devices can enjoy seamless connection within the wireless coverage with ONE network name and password. Step 1: Power up RE23S Power up the RE23S by plugging it into a power socket near the Wi-Fi router and wait for the Power LED to turn on. Step 2: Set RE23S as an Extender using WPS: 1.
Step 3: Relocate the RE23S 1. Please relocate the RE23S to achieve the desired coverage. 2. Observe the Wi-Fi LED behavior to determine whether the location is appropriate. For maximum coverage, relocate the RE23S to where signal strength is at Good Performance (less overlapping with the Wi-Fi Router).
Frequently Asked Questions (FAQ) 1. I can’t see the login page after entering http://edimax.setup in the browser, what can I do? A: To correct the situation, please try any of the following methods: - Try and make sure your computer is connected to the RE23S wireless network. - Try and make sure your computer is configured as “Obtain an IP Address Automatically” and “Obtain DNS Server Address Automatically”. 2. I can’t access RE23S anymore.
Please refer to the user manual for more information, or see below. 9. How do I get more information? A: There are many ways to get more information: 1. Decode the QR code on the right (smart phone, tablet, pc, etc.) and click the download icon to download RE23S User Manual; or 2. Go to the link below and click the download icon to download RE23S User Manual: http://www.edimax.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Countries Intended for Use The ETSI version of this device is intended for home and office use in Austria, Belgium, Bulgaria, Cyprus, Czech, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Turkey, and United Kingdom. The ETSI version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/30/EU, 2014/35/EU, 2011/65/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment Directive . Equipment: Home Roaming Wi-Fi Extender Model No.: RE23S The following European standards for essential requirements have been followed: Spectrum: ETSI EN 300 328 V2.1.1 ETSI EN 301 893 V2.1.1 EMC: EN 301 489-1 V2.2.0 EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.