Operation Manual

58
range for guest IP addresses.
SSID
This is the name of your Wi-Fi network for
identification, also sometimes referred to as
“SSID”. The SSID can consist of any
combination of up to 32 alphanumerical
characters.
Guest SSID
This is the name of your guest Wi-Fi network
for identification, also sometimes referred to
as “SSID”. The SSID can consist of any
combination of up to 32 alphanumerical
characters.
Channel Number
Select a wireless radio channel or use the
default “Auto” setting from the drop-down
menu.
Access Point Mode
The “Basic” screen displays settings for your 2.4GHz or 5GHz Wi-Fi networks
and you can configure multiple SSIDs by clicking the Multiple SSID button.
Mode
Keep the default “AP” value for the device to
act as a standard wireless access point.
Band
Select the wireless standard used for the
RG21S’s “2.4GHz (B+G+N)” means that
802.11b, 802.11g, and 802.11n wireless
clients can connect to the RG21S.
SSID
Set the SSID name for your access point’s
Wi-Fi network. Click the Multiple SSID button
to setup multiple SSIDs (below).
Channel
Select a wireless radio channel or use the
default “Auto” setting from the drop-down