Quick Installation Guide

9
III. Wi-Fi Roaming
Your RG21S supports Wi-Fi roaming. This means if you have other EDIMAX
Wi-Fi products which support roaming (e.g. access point, extender) then your
Wi-Fi devices (smartphones, tablets etc.) will automatically connect to the
best available Wi-Fi signal as you move around or “roam” between them in
your home.
To setup other EDIMAX Wi-Fi roaming range extender, refer to their
included documentation for instructions.
To setup EDIMAX Wi-Fi roaming extenders with your router/AP, you can
simply press the WPS button, as explained below. Ensure both products are
within range of each other.
1. Press the WPS button on your router/AP
for 3 seconds.
2. Within two minutes, press and hold the
WPS button for 3 seconds on the new
extender you would like to add. The
extender’s green WPS LED should flash to
indicate that WPS is in progress.
3. The devices will establish a connection.
extender’s green WPS LED should display on for
30 seconds to indicate a successful connection.
Your extender is now active with automatic
roaming.
Refer to your EDIMAX roaming Wi-Fi extenders documentation for more
information.