User Manual

16
II-3. Wi-Fi Roaming
Your RG21S/RA21S supports Wi-Fi roaming. This means if you have
other EDIMAX Wi-Fi products which support roaming (e.g. access point,
extender) then your Wi-Fi devices (smartphones, tablets etc.) will
automatically connect to the best available Wi-Fi signal as you move
around or “roam” between them in your home.
To setup other EDIMAX Wi-Fi roaming range extender, refer to their
included documentation for instructions.
To setup EDIMAX Wi-Fi roaming extenders with your router/AP, you
can simply press the WPS button, as explained below. Ensure both
products are within range of each other.
1. Press the WPS button on your
router/AP for 3 seconds.
2. Within two minutes, press and
hold the WPS button for 3
seconds on the new extender
you would like to add. The
extender’s green WPS LED should
flash to indicate that WPS is in
progress.
3. The devices will establish a connection.
extender’s green WPS LED should display
on for 30 seconds to indicate a successful
connection. Your extender is now active
with automatic roaming.
Refer to your EDIMAX roaming Wi-Fi extenders documentation for more
information.