User Manual

52
DHCP Server
Enable or disable the DHCP server.
Lease Time
Select a lease time for the DHCP leases here.
The DHCP client will obtain a new IP address
after the period expires.
Start IP
Enter the start IP address for the DHCP server’s
IP address leases.
End IP
Enter the end IP address for the DHCP
server’s IP address leases.
DNS
Select whether to get DNS addresses
dynamically from ISP or manually enter DNS
addresses.
Primary DNS Address
When Static IP is selected above, enter the
primary DNS address here.
Secondary DNS Address
When Static IP is selected above, enter the
secondary DNS address here.
The LAN IP page will be displayed as below when your device is
set to access point mode. You can set the RG21S/RA21S to obtain
an IP address automatically or you can specify an IP address.