User Manual

54
III-3-5-1. Basic
The “Basic” screen displays settings for your 2.4GHz or 5GHz Wi-Fi networks.
Mode
Keep the default “AP” value for the device to
act as a standard wireless access point.
Band
Displays the wireless standard used for the
RG21S/RA21S’s “2.4GHz (B+G+N)” means that
802.11b, 802.11g, and 802.11n wireless clients
can connect to the RG21S/RA21S.
Guest Network
You can setup an additional “Guest” Wi-Fi
network so guest users can enjoy Wi-Fi
connectivity without accessing your primary
network. Enable or disable here.
Guest IP Address
Set the guest network IP address.
Guest Subnet Mask
Set the guest network subnet address.
Guest Lease Time
Set the lease time for the DHCP server for IP
addresses on the guest network.
Guest Start IP
Set the start IP address for the DHCP server
range for guest IP addresses.
Guest End IP
Set the end IP address for the DHCP server