SP-1101W Quick Installation Guide 06-2014 / v1.
I. Product Information .............................................................................. 3 I-1. Package Contents .............................................................................. 3 I-2. Front Panel ....................................................................................... 3 I-3. LED Status ........................................................................................ 4 I-4. Switch Status Button ..........................................................
I. Product Information I-1. Package Contents Smart Plug Switch I-2.
I-3. LED Status LED Color Switch Status Status Description On Smart plug output power socket is on. Off Smart plug output power socket is off. On Smart plug is powered on. Off Smart plug is off. Green Power Green Quick Flashing Red Network Green Smart plug is starting up or restarting. Slow Flashing (1 Smart plug is in installation mode and x per second) ready for setup. Smart plug is connected to wireless On network and cloud.
I-5. Product Label The product label, which is located on the back of the smart plug switch, displays the input/output power and the default password of your smart plug. The password should be changed when you have finished the installation process for security purposes. The password is required to access the smart plug switch remotely. I-6. Reset If you experience problems with your smart plug, you can reset the plug back to its factory default settings.
II. Hardware Installation Follow the instructions below to ensure your smart plug is properly connected and ready for setup. If you have multiple smart plugs to set up, please only plug in and set up one smart plug at a time. 1. Plug the smart plug into a power socket. 2. Wait a few moments for the smart plug to start up. The smart plug is ready for setup when the network LED is flashing slowly red to indicate installation mode.
III. Smart Plug Setup To set up your smart plug with the free EdiPlug smartphone app, please download the EdiPlug app and then follow the setup instructions for iOS or Android. After setup, you can use the EdiPlug app to switch your smart plug switch on/off remotely from any smartphone with an Internet connection, as well as set up automated schedule and email notifications. 1. Search the Apple App Store or Google Play for “EdiPlug”. 2. Download and install the app. 3.
III-1. iOS Follow the instructions below to add a new smart plug to the EdiPlug app on iOS: You must be within Wi-Fi range of the smart plug. If you have multiple smart plugs, please only plug in and set up one plug at a time. 1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as shown below: 2.
3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that setup is complete! 4. Your smart plug will now be displayed on the EdiPlug main screen. Slide the switch to switch the your smart plug (and any electrical device you plug into it) on or off. 5. The smart plug’s network LED should display on and green to indicate a successful network and cloud connection. You can use the EdiPlug app to control your smart plug remotely from any Internet connection.
III-1-1. Change Smart Plug Name & Password 1. Select “Edit” from the EdiPlug main screen and then select the smart plug which you wish to edit from the list. 2. Enter a new name and password for your smart plug and tap “Back” to go back to the main screen. Your smart plug will now be displayed under its new name.
III-1-2. Add an Existing Smart Plug to the Main Screen 1. From the EdiPlug main screen, click the “+” icon in the top-right corner and select a plug from the list. 2. Enter your smart plug next screen to finish. password and tap “OK”.
III-2. Android Follow the instructions below to add a new smart plug to the EdiPlug app on Android: You must be within Wi-Fi range of the smart plug. If you have multiple smart plugs, please only plug in and set up one plug at a time. 1. Open the EdiPlug app and click the “+” icon in the top-right corner of the screen. 2. Tap “Install a New Plug” and select your Wi-Fi network from the list, as shown below.
3. Enter your Wi-Fi password and tap “OK”. The next screen will indicate that setup is complete! 4. Your smart plug will now be displayed on the EdiPlug main screen. Slide the switch to switch your smart plug (and any electrical device you plug into it) on or off. 5. The smart plug’s network LED should display on and green to indicate a successful network and cloud connection. You can use the EdiPlug app to control your smart plug remotely from any Internet connection.
III-2-1. Change Smart Plug Name & Password 1. Select “Edit” from the EdiPlug main screen and then select the smart plug which you wish to edit from the list. 2. Enter a new name and password for your smart plug and tap “Back” to go back to the main screen. Your smart plug will now be displayed under its new name.
III-2-2. Add an Existing Smart Plug to the Main Screen 1. From the EdiPlug main screen, click the “+” icon in the top-right corner and select a plug from the list. 2. Enter your smart plug password and tap “OK”. Click “Back” on the next screen to finish.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2006/95/EC, 2004/108/EC, 1999/5/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2006/95/CE, 2004/108/CE, 1999/5/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2006/95/ES, 2004/108/ES, 1999/5/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., is hereby confirmed to comply with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Radio Equipment and Telecommunications Terminal Equipment Directive (1999/5/EC) and Electromagnetic Compatibility Directive (2004/108/EC) and Low Voltage Directive (2006/95/EC).
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
1. You may copy and distribute verbatim copies of the Program’s source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program.
5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6.