SP-1101W /SP-2101W Quick Installation Guide 05-2014 / v1.
I. Product Information I-1. Package Contents Smart Plug Switch I-2.
I-3. LED Status LED Color Switch Status Status Description On Smart plug output power socket is on. Off Smart plug output power socket is off. On Smart plug is powered on. Off Smart plug is off. Green Power Green Quick Flashing Red Network Green Orange Smart plug is starting up or restarting. Slow Flashing (1 Smart plug is in installation mode and x per second) ready for setup. Smart plug is connected to wireless On network and cloud.
I-5. Product Label The product label, which is located on the back of the smart plug switch, displays the input/output power and the default password of your smart plug. The password should be changed when you have finished the installation process for security purposes. The password is required to access the smart plug switch remotely. I-6. Reset If you experience problems with your smart plug, you can reset the plug back to its factory default settings.
II. Hardware Installation Follow the instructions below to ensure your smart plug is properly connected and ready for setup. If you have multiple smart plugs to set up, please only plug in and set up one smart plug at a time. 1. Plug the smart plug into a power socket. 2. Wait a few moments for the smart plug to start up. The smart plug is ready for setup when the network LED is flashing slowly red to indicate installation mode.
III. Smart Plug Setup To set up your smart plug with the free EdiPlug smartphone app, please download the EdiPlug app and then follow the setup instructions for iOS or Android. After setup, you can use the EdiPlug app to switch your smart plug switch on/off remotely from any smartphone with an Internet connection, as well as set up automated schedule and email notifications. 1. Search the Apple App Store or Google Play for “EdiPlug”. 2. Download and install the app. 3.
III-1. iOS Follow the instructions below to add a new smart plug to the EdiPlug app on iOS: You must be within Wi-Fi range of the smart plug. If you have multiple smart plugs, please only plug in and set up one plug at a time. 1. Search for a Wi-Fi network named “EdiPlug.Setup” and connect to it, as shown below: 2.
3. Enter your Wi-Fi password and tap “OK”, then wait a moment for your plug to restart. 4. The next screen will indicate that setup is complete. Your smart plug will now be displayed on the EdiPlug main screen. Tap the switch to switch your smart plug (and any electrical device you plug into it) on or off. 5. The smart plug’s network LED should display on and green to indicate a successful network and cloud connection.
III-1-1. Change Smart Plug Name & Password 1. Select “Edit” from the EdiPlug main screen and then select the smart plug which you wish to edit from the list. 2. Enter a new name and password for your smart plug and then tap “Back” to go back to the main screen. Your smart plug will now be displayed under its new name. Features such as scheduling, budget control and email notifications can also be set up in the “Plug Settings” menu.
III-1-2. Add an Existing Smart Plug to the Main Screen 1. From the EdiPlug main screen, click the “+” icon in the top-right corner and select a plug from the list. 2. Enter your smart plug’s password and tap “OK”. Click the check icon by your smart plug’s name on the next screen to finish. The default password is 1234.
III-2. Android Follow the instructions below to add a new smart plug to the EdiPlug app on Android: You must be within Wi-Fi range of the smart plug. If you have multiple smart plugs, please only plug in and set up one plug at a time. 1. Open the EdiPlug app and click the “+” icon in the top-right corner of the screen. 2. Tap “Install a New Plug” and select your Wi-Fi network from the list, as shown below.
3. Enter your Wi-Fi password and tap “OK”, then wait a moment for your plug to restart. 4. The next screen will indicate that setup is complete. Click “Next” and your smart plug will now be displayed on the EdiPlug main screen. Tap the switch to switch your smart plug (and any electrical device you plug into it) on or off. 5. The smart plug’s network LED should display on and green to indicate a successful network and cloud connection.
III-2-1. Change Smart Plug Name & Password 1. Select “Edit” from the EdiPlug main screen and then select the smart plug which you wish to edit from the list. 2.Enter a new name and password for your smart plug and tap “Back” to go back to the main screen. Your smart plug will now be displayed under its new name. Features such as scheduling, budget control and email notifications can also be set up in the “Plug Settings” menu.
III-2-2. Add an Existing Smart Plug to the Main Screen 1. From the EdiPlug main screen, click the “+” icon in the top-right corner and select a plug from the list. 2. Enter your smart plug’s password and tap “OK”. Click the check icon by your smart plug’s name on the next screen to finish. The default password is 1234.