SP-1123WT Quick Installation Guide 12-2019 / v1.
Contents I. Product Information & Safety Information ....... 1 II. Package Contents ............................................. 2 II-1. System Requirement ................................................... 2 II-2. LED Status .............................................................. 3 II-3. Hardware Interface .................................................... 3 III. Hardware Installation.................................... 4 IV. EdiSmart Pro App Installation.......................... 5 IV-1.
IMPORTANT SAFETY INFORMATION In order to ensure the safe operation of the device and its users, please read and act in accordance with the following safety instructions: WARNING: There is risk of fire or electric shock if the device is used inappropriately. If you experience problems with the device, please contact your dealer of purchase for help. Accidental damage will void the warranty of the device. 1. The device must be used within its published power outlet rating. 2.
I. Product Information & Safety Information The SP-1123WT Smart Power Strip equipped with 3 outlets and 4 X USB charging port allows you to control your electrical devices from anywhere using your Smartphone to set schedules, turn devices on and off via EdiSmart Pro app or use voice commands with Amazon Alexa, Google Assistant and Apple Siri.
II. Package Contents Before using this product, please check if anything is missing from the packaging, and contact your dealer to claim the missing item(s): Smart Power Strip Quick Installation Guide II-1. System Requirement - Wi-Fi: 2.4 GHz 802.11 b/g/n - Android 4.
II-2. LED Status LED Name Power LED Status LED Color Green Green Red Status On Off Flashing quickly Red Red Flashing slowly Red On Off II-3.
No. Description 1 Power Button 2 USB Ports X 4 3 Power Socket X 3 4 Status LED (Red Light) 5 Power LED (Green Light) III.Hardware Installation Please follow the steps below to install your smart power strip. 1. Plug the smart power strip into the wall plug outlet. 2. Plug a device, for example, coffee maker, lights or television into the smart power strip.
IV. EdiSmart Pro App Installation Search and download "EdiSmart Pro" in Apple App Store or Google Play Store. Launch the "EdiSmart Pro" in your smart mobile device. Before using EdiSmart Pro app, please make sure, - Your mobile device is connected to a 2.4 GHz Wi-Fi. NOTE: Only 2.4 GHz Wi-Fi networks are supported. Please select a 2.4 GHz Wi-Fi network. - Go to your phone’s system language, and select the language you want to use for EdiSmart Pro app.
IV-1. Register Accounts Please follow the steps below to set up your EdiSmart Pro app, 1. Launch the EdiSmart Pro app in your device and click the “Register” button to register an account with your email or phone number.
2. After clicking the “Register” button you will see a pop-up Privacy Policy message. Click the “Agree” button to proceed the next step. 3. Select your region and enter the email or phone number. And click the “Get Verification Code” button to receive your 6 digit verification code.
4. Set a 6 to 20 characters, including letters and digits password. Click the “Done” button.
Congratulations! You are finished with the installation. NOTE: If you already have an EdiSmart Pro account, please click “Login with Existing Account” to log in. Select your region, enter the mobile number/email, password and click the “Log In” button to log in your account.
V. Adding Devices (Android Interface) Please follow the steps below to add a new device. 1. Click the “Add Device” button or the “+” icon in the top right corner.
2. Select “Add Manually” and Power Strip (Wi-Fi). 3. Activate Pairing mode on the smart power strip. Press and hold the power button for 5-7 seconds until the Power LED blinking RED light.
4. Press the “Confirm indicator rapidly blink” button. 5. Enter the Wi-Fi password and click the “Confirm” button. NOTE: - Please make sure Wi-Fi is on all the time. - Please manually enter the Wi-Fi SSID in iOS.
6. Wait for the smart power strip to connect to the EdiSmart Pro. Congratulation! You are finished with the installation.
After a new installation, the configuration can be changed in the device page, for example: - Countdown (Set timer, schedule your Smart Plug to automatically turn on/ off your electronics as needed) - Power ( Remotely control power from anywhere) - Schedule (Schedule the smart power strip to automatically power electronics on and off as needed) 14
NOTE: If you want to remove the device, please click the top right icon and click the “Remove Device” button.
VI. Factory Default If you experience problems with your smart power strip, you can reset the device back to its factory settings. There are 2 ways to reset the device. Hardware Reset: 1. Press and hold the power button for 5 seconds 2. Wait for the smart power strip to reset. The smart power strip is ready for setup when the power LED blinking RED light.
Software Reset: 1. Click the top right icon on the device page. 2. Click the “Restore Factory Defaults” button.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Home smart WI-FI power strip Model No.: SP-1123WT The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ETSI EN 300 328 V2.1.1 (2016-11) EMC EMF : Draft ETSI EN 301 489-1 V2.2.1 (2019-03) Draft ETSI EN 301 489-17 V3.2.
Notice According to GNU General Public License Version 2 This product includes software that is subject to the GNU General Public License version 2. The program is free software and distributed without any warranty of the author. We offer, valid for at least three years, to give you, for a charge no more than the costs of physically performing source distribution, a complete machine-readable copy of the corresponding source code.
intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2.
6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients’ exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7.
