SP-2101W V3 Quick Installation Guide 07-2020 / v1.
Contents I. Product Information & Safety Information ........ 1 I-1. Package Contents .................................................................................. 2 I-2. System Requirement ............................................................................. 2 I-3. LED Status ............................................................................................. 2 I-4. Hardware Interface ............................................................................... 3 II.
I. Product Information & Safety Information The Edimax Smart Plug SP-2101W V3 connects people to their homes and the things they use every day. With the Edimax Smart Plug you can control most home appliances and check the Power Meter, from anywhere anytime with the EdiSmart App. Please install the unit with the safety restrictions outlined below: - Maximum Power Rating must not be exceeded in order to guarantee the lifespan and reliability of.
I-1. Package Contents Before using this product, please check if anything is missing from the packaging, and contact your dealer to claim the missing item(s): AU UK US EU Quick Installation Guide I-2. System Requirement - Wi-Fi: 2.4 GHz 802.11 b/g/n - Android 6 or later - iOS 11 or later I-3.
I-4. Hardware Interface US Smart Plug: AU Smart Plug: 1 1 2 2 EU Smart Plug: UK Smart Plug 1,2 1,2 No.
II. EdiSmart App Installation Search and download "EdiSmart" in App Store (iOS) / Google Play Store (Android) or scan the QR code below. Launch the "EdiSmart" in your smart mobile device. Before using EdiSmart app, please make sure, - Your mobile device can access the internet. NOTE: Only 2.4 GHz Wi-Fi networks are supported. Please select a 2.4 GHz Wi-Fi network. - Go to your phone’s system language, and select the language you want to use for app.
III. Register the Account Please follow the steps below to register the account, 1. Launch the EdiSmart App in your device and click the “Sign up” button to register an account with your email. 2. Read the preamble and click “Yes” to proceed the next step.
3. Enter your Email and Password. Chick the “Sign up” button to proceed the next step. 4. Please check your email and click the “Confirm Your Email” button. *************@gmail.com Note: You will receive a message, “Congratulation! You have been successfully registered.
IV. Adding Devices (Android & iOS Interface) Please follow the steps below to add a new device. 1. Click the “Login” button. Enter your Email/Password and click the “Login” button. 2. Click the “+” icon in the top right corner.
3. Click “Add New Devices”. 4. Follow the instruction on screen and enter the last two digits of MAC. Click the “Make sure the Status LED indicator blinks” button to confirm. NOTE: Please make sure Wi-Fi is on all the time.
5. Select the device that you wish to connect to the EdiSmart and click “Connect” or “Join”. Android iOs 6. Select a Wi-Fi SSID to connect and enter the Wi-Fi password.
7. Wait for the smart plug to connect to the EdiSmart. And enter a device name and click “Done”. Congratulation! You are finished with the installation.
V. Factory Default If you experience problems with your smart plug, you can reset the device back to its factory settings. There are 2 ways to reset the device. Hardware Reset: 1. Press and hold the power button for 10-15 seconds, release the button when the power LED flashes quickly in blue. 2. When the power LED blinks slowly in blue, it is ready for setup. Software Reset: 1. Click the top right icon on the device page.
2. Click Advance and “Reset to Default” button.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wi-Fi Smart Plug Model No.: SP-2101W V3 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ESTI EN 300 328 V2.1.1:2016 EMC : Draft EN 301 489-1 V2.0.0:2017 Draft EN 301 489-17 V3.2.
