Operation Manual

I-5. Product Label

The product label, which is located on the back of the smart plug switch,

displays the input/output power and the default password of your smart plug.

The password should be changed when you have finished the installation

process for security purposes. The password is required to access the smart

plug switch remotely.

I-6. Reset

If you experience problems with your smart plug,

you can reset the plug back to its factory default

settings. This resets all settings, including the

smart plug’s password, back to default.

1. Press and hold the reset button found on the

front of the plug for at least 10 seconds

2. Release the button when the network LED is

flashing quickly red.

3. Wait for the smart plug to restart. The camera

is ready when the network LED is flashing

slowly red to indicate installation mode.