User Manual

51
To add a new event, click ‘New’ button and the descriptions of every setup
item is listed below:
Item
Description
Enable Setting
Check this box to enable this event. If you just want to disable
this event temporarily, you can uncheck this box to keep this
event and disabling while not deleting it.
Title
Input any description text for this event so you can identify it
quickly. You can use alphabets, numbers, and symbols
include: !$-.@^_~ (no spaces allowed).
Motion
Detection
Check this box and this event will be activated when one of
motion detection window detects motion.
Digital Input 1
Digital input 2
Check this box and this event will be activated when digital
input 1’s input signal is high or low (select from dropdown list).
Enable
Schedule Time
Check this box and this event will be activated when
designated weekday and time is reached.
You also have to check weekday box, and select time from
dropdown list. If you select ‘Always’ as time, this event will be
activated during all the day.
Enable FTP
Check this box and IP camera will save file on FTP server (refer
to ‘FTP Server’ setting in ‘Event Server’ tab) when this event is
activated.
Enable EMAIL
Check this box and IP camera will send an Email to designated
recipient address (refer to ‘SMTP Server’ setting in ‘Event
Server’ tab) when this event is activated.
Enable Samba
(Net Storage)
Check this box and IP camera will save file on samba server
(refer to ‘Samba Server’ setting in ‘Event Server’ tab) when this
event is activated.
Enable SD
CARD
Check this box and IP camera will save file on SD card when
this event is activated. A working SD card must be inserted into
IP camera in advance.
Trigger digital
output for xx
second(s).
Check this box and IP camera will trigger digital out to ‘high’
state for xx seconds when this event is activated, where ‘xx’
seconds must be defined by the dropdown list.