SC1000 Quick Installation Guide 07-2014 / v1.
I. Product Information I-1. Package Contents 1 2 4 1. 2. 3. 1 Security Cover Mounting Bracket Screws 5 4. 5. 6.
I-2. Safety Information The security cover is only for use with the following Edimax products: - WAP1750 - WAP1200 The security cover should only be mounted to walls – not ceilings. Please note the following requirements for your security cover’s location: Do not attempt to fix the security lock to a ceiling or roof. The security lock is for indoor use only. 1. Do not mount your security cover and WAP1750/1200 directly next to other electronic devices. 2. Do not mount on uneven, slanted or unstable walls.
II. Assembly 1. Fix the mounting bracket to the wall using the included screws. Drill holes and use the included wall-mounting anchors if you need. Ensure the mounting bracket is positioned the correct way up, according to the picture: 2. Press your WAP1750/1200 (oriented with the antennas at the bottom) into the bracket and slide downwards to click into position.
3. Turn the security cover lock to the “Open” position using the key, and push the right-side of the security cover into position first. With the rightside in place, push the left-side down to secure the cover firmly in position. 4. Turn the lock to “Close” and remove the key.
III. Removing the Security Cover 1. To remove the security cover, insert the included ejector key behind the WAP1750/1200 to unhook the locking clip, as shown below. Slide the WAP1750/1200 up to remove.
6