Quick Installation Guide WP-4500K Quick Installation Guide 03-2021 / v1.
Contents I. Product Information ................................................1 I-1. Package Contents ...................................................................2 I-2. System Requirement ..............................................................2 I-3. Hardware Interface ................................................................3 I-3-1. RX Overview ....................................................................3 I-3-2. TX Overview .....................................................
I. Product Information The WP-4500K Wireless Projection System offers efficiency and creativity with unprecedented Native 4K HD wireless presentation solution for business meetings, wedding or hug conference room. Easy plug-and-play makes group presentations possible with just one click, users can cast, interact and receive high-quality imagery over multiple types of devices (desktop, laptop, tablet and mobile). You can find all supporting documents from the link below or via QR Code: https://www.edimax.
I-1. Package Contents WP-4500K (TX) WP-4500K (RX) (USB power cable included) HDMI Cable (100 cm) HDMI Cable (30 cm) Power Adapter Kit (For WP-4500RX) Quick Installation Guide I-2. System Requirement* - Windows 7/8/10 32bit/64bit Mac 10.9 iOS 9 Android 5 *Additional version information will be announced on the EDIMAX website.
I-3. Hardware Interface I-3-1.
No. Description 1 Antenna 2 Power Jack 3 Power Button 4 USB Port 5 Ethernet Port 6 HDMI Out Port 7 Reset Button I-3-2.
I-4. No. Description 1 Main Button 2 LED 3 Side Button & LED 4 HDMI In Port 5 USB Power Cable LED Status LED Status LED Color Side Button LED Color Off N/A Green Off N/A Red On White Green On White Red On Red Red On Red Green Flashing Red Red Flashing Red Red and flashing Flashing Red Off TX OTA fails. Flashing White Off Paring is done. Flashing White Off TX OTA completes. 5 Description TX is in Host mode and not projecting.
LED II. Hardware Installation Please follow the steps below to install your WP-4500K projection system, II-1. RX Installation 1. Attach the power supply to the RX.
2. Press the Power Button at the back of the RX. 3. Plug HDMI cable into both your RX and projector’s, TV's or monitor’s HDMI ports.
II-2. TX Installation 1. Plug TX USB cable into your laptop USB port. 2. Plug HDMI cable into both your TX and laptop. II-3. Share the Screen 1. Press the main button on the TX to share your screen to the TV or monitor. 2. Press again the main button to disconnect.
III.Accessing the Web UI Please follow the steps below to access the WP-4500K Web UI. 1. Connect the SSID “Edimax_WHDMI” from your laptop network Wi-Fi and find the password via RX landing page. 2. Turn on web browser and enter “192.168.168.1” in the address bar.
3. Enter the default password and tap “OK” to login “Admin Settings” page. For further configuration, please refer to the WP-4500K manual. IV. Connecting the WP-4500K via Smatrphone App You can connect the WP-4500K via “Google Home” in Android and iOS “AirPlay or Screen Mirroring”. IV-1. Android OS Please follow the steps below to connect your WP-4500K with Android phone via “Google Home” App. 1. Download and install “Google Home” App from Play Store.
IV-2. iOS Please follow the steps below to connect your WP-4500K with iOS phone via “Screen Mirroring” or “AirPlay Mirroring”. 1. Connect the SSID “Edimax_WHDMI” from your iOS phone and enter the default password via RX landing page. 2. Swipe down from the upper-right corner to reveal the Control Center. 3. Tap the “Screen Mirroring” or “AirPlay Mirroring” button. NOTE: For more details how to add devices on “Screen Mirroring” or “AirPlay Mirroring”, please refer to the instructions via internet.
V. Applications & Operation Please follow the steps below to mirror your screen to the monitor. 1. Follow the instructions on “Hardware Installation” Chapter to set up the WP-4500K projector system. 2. Connect the SSID “Edimax_WHDMI” from your laptop network Wi-Fi and enter the via RX landing page. 3. You will see the image displays on your monitor as below. NOTE: To disconnect the connection from the host, please click the main button on TX again.
Icon description: Icon/Item Description This icon shows the Airplay status ( activated or deactivated) This icon shows the RX paring and connection status. The number (2) shows the total number of TX and device that are connected to the RX. This icon shows the Wi-Fi signal status (connected or disconnected) This icon shows the RJ45 port connection status (connected or disconnected) Direct Link IP RX’s IP address. 4. Press the main button on TX to establish a connection with your laptop.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
version of this device is also authorized for use in EFTA member states: Iceland, Liechtenstein, Norway, and Switzerland. EU Countries Not Intended for Use None EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wireless transmitter Model No.: WP-4500TX The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ETSI EN 301 893 V2.1.1 (2017-05) EMC : ETSI EN 301 489-1 V2.2.0 (2017-03) ETSI EN 301 489-17 V3.2.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Wireless receiver Model No.: WP-4500RX The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : ETSI EN 300 328 V2.2.2 (2019-07) ETSI EN 301 893 V2.1.1 (2017-05) EMC : ETSI EN 301 489-1 V2.2.3 (2019-11) ETSI EN 301 489-17 V3.2.
