XGS-5008 Guide d’installation rapide 10-2016 / v1.
I. Information produit I-1. Contenu de la boite QIG XGS-5008 Switch Cordon Alimentation I-2.
I-3. Login Pour vous connecter à l'interface de gestion Web et configurer les paramètres du commutateur, connectez un ordinateur au commutateur à l'aide d'un câble Ethernet. Ouvrez un navigateur Web et allez à l'adresse IP du commutateur. L'adresse IP par défaut est 192.168.2.1. L'adresse IP de votre ordinateur doit se trouver dans le même sous-réseau que le commutateur. Pour l'adresse IP par défaut, il s'agit de toute adresse IP comprise dans la plage 192.168.2.x (x = 2 - 254).
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 1995/5/EC, 2009/125/EC, 2006/95/EC, 2011/65/EC. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 1995/5/CE, 2009/125/CE, 2006/95/CE, 2011/65/CE. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 1995/5/ES, 2009/125/ES, 2006/95/ES, 2011/65/ES.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directives. Equipment: XGS-5008 Model No.