User Manual
29
Recording
The following describes how to record audio from a maximum of four microphones connected to the R-44’s
Combo input jacks.
fig.mic-1.eps
● Connections
Connect the microphone(s) to the Combo input jack(s).
983
Acoustic feedback could be produced depending on the location of microphones relative to speakers. This
can be remedied by:
1. Changing the orientation of the microphone(s).
2. Relocating microphone(s) at a greater distance from speakers.
3. Lowering volume levels.
● Phantom power switch
Turn this ON when connecting a phantom-powered condenser microphones.
fig.input-analog.eps
● System settings
1. Press the [MENU] button.
2. In 1 Recording Setup, set Input Select to Analog.
Set the other items in 1 Recording Setup as appropriate
for the recording you want to make.
3. When finished with the settings, press the [EXIT] button
twice to return to the Main screen.
* For more about system settings, refer to “System Setup” (p. 62).
● Limiter
Turn this ON if you want to prevent unexpectedly loud sounds or strong attacks from producing clipping noise.
The limiter threshold is -10 dB relative to digital full scale.
The limiter can group and link each channel. Refer to Limiter link (p. 70).
Recording from a Connected Microphone
Adjust the input
LEVEL and SENS
Microphone(s)
Turn this ON
if you’re using a
condenser microphone.