User Manual

58
Setting the Color of Sound (Effects Settings)
You can adjust the R-44’s effects not only while in standby for recording or playback, but also while you are
listening to the sound during actual playback or recording.
This section explains how to adjust the effect settings during playback or in recording standby mode.
fig.effect-set.eps
fig.effect-1.eps
1
Press the [EFFECTS] button.
The Effects setup screen is shown on the display.
fig.effect-type+.eps
2
Use the [SCRUB/VALUE] dial to select the desired effect
type.
For details on each effect type, refer to “Effects” (p. 60).
fig.effect-link+.eps
3
Press the Cursor button [ ]. The cursor will move to
the “Link” field.
fig.effect-lin.eps
4
Use the [SCRUB/VALUE] dial to specify the channels to
be linked.
Applying Effects
CH1 CH2 CH3 CH4 The effect on/off setting and effect parameters are set independently for each channel.
CH1+2 CH3+4
The effect on/off setting and effect parameters are linked for channels 1 and 2 and for
channels 3 and 4.
Choose this setting if the project uses channels 1 and 2 and channels 3 and 4 as stereo
pairs.
CH1+2+3+4 The effect on/off setting and effect parameters are linked for all channels.
1
3
2
6