User guide

ProductionVIEW Super Joystick

ProductionVIEW Super Joystick Manual 341-565 Rev. B Page 4 of 16

ProductionVIEW Super Joystick Front Panel Controls (Figure 2):

1) MASTER POWER (system on/off)

2) EXTERNAL VIDEO A

• Selector Switch assigns External Video Input A to the Built-in 4” LCD Monitor

3) EXTERNAL VIDEO B

• Selector Switch assigns External Video Input B to the Built-in 4” LCD Monitor

4) EXTERNAL CONTROL A

• For controlling external devices via tally contacts (contact closure) or RS-232

5) EXTERNAL CONTROL B

• For controlling external devices via tally contacts (contact closure) or RS-232

6) HALL EFFECT JOYSTICK

• Pan (left, right), Tilt (up, down), Zoom (twist +, -) Camera Control

7) CAMERA CONTROLS

• Brightness (+, -) and Focus (Far, Near) controls

8) CAMERA CONTROLS

• BLC – Back Light Compensation and AWB – Automatic White Balance

9) CAMERA SELECTION

• Selects camera to be controlled by the Joystick and camera controls (brightness, focus, etc.)

10) CAMERA PRESETS

• Twelve (12) camera presets per camera can be saved under the Camera Preset switches

• In “6InCam 6Loca

l”, Presets 1 - 6 are stored in the cameras & 7 - 12 are stored internally

11) LCD DISPLAY CONTROLS (recessed mini screw driver adjustments on front edge)

• Left Adjustment - Color Saturation (up, down), Right Adjustment - Brightness (up, down)

12) MENU CONTROLS

• Select, up, down and Cancel used to navigate menu system (see pages 9 & 10)

13) LCD Display for Menu Control

• See Appendix 1 for detailed description

14) 4” LCD PREVIEW MONITOR

• Select between EXTERNAL VIDEO A and EXTERNAL VIDEO B inputs