Owner`s manual

Placement and connections

Cooling vents

Do not block the cooling vents located on the sides of the VC-50HD. When placing the VC-50HD,

make sure to leave at least 2 cm of space in front of the cooling vents. If the air intake or exhaust are

blocked, the interior temperature will rise, possibly causing heat-related malfunctions.

fig.both-sides.eps

Theft prevention lock

A commercially available security cable can be attached to the VC-50HD to prevent theft.

For details, refer to the following URL.

http://www.kensington.com/

fig.kensington.eps

Connection cables

Ferrite cores

Six ferrite cores are included with the VC-50HD. Attach these ferrite cores to the IEEE 1394 cables,

HDMI cables, and USB cables that are connected to the VC-50HD. Place the ferrite core around the

cable and press it closed until it clicks shut.

* A ferrite core is attached to the included AC adaptor when it is shipped from the factory. Do not remove this

ferrite core. Attach the ferrite cores to the input/output cables.

* Be careful not to pinch your hand when attaching the ferrite core.

Cable quality

Use high-quality cables to make connections. Poor-quality cables may not convey the signal correctly.

Intake

Exhaust

Ferrite Core