Owner`s manual

Connecting Monitors/Mixers

Connecting monitor equipment

The VC-50HD provides an HDMI output connector. You can set up an inexpensive monitoring

environment by connecting this to a television or personal computer display equipped with an HDMI

input.

* Up/down conversion, I/P conversion, and frame rate conversion are not performed for the HDMI output

either.

* The audio channels that are output via HDMI are as follows.

•For HD/SD-SDI input : The channels selected by mode select switches 2/3

•For IEEE 1394 input : Channels 1/2

fig.HDMI-out.eps

Using the SDI thru-out

If the SDI output of a camera or other device is being input to the VC-50HD and you want the signal to

be output to a video mixer or other device in addition to a video recorder, you can use the HD/SD-SDI

output/thru-out connector.

fig.SDI-thru.eps

Video Mixer/Monitor