Ref. 554912 EN DVB-T SD/HD Encoder/Modulator User Manual w w w. t e l e v e s .
Index 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 General description. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.2 Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.3 Contents. . . . . . . . . . . . . . . . . . . . .
DVB-T SD/HD Encoder/Modulator 4 Safety Instructions 1.3 Contents WARNING: To prevent fire or electrical shock, do not expose the device to rain or moisture. Verify that the following components are included in the packaging: General Precautions Avoid placing the device next to central heating components and in areas of high humidity. Do not cover the device with elements that obstruct the ventilation slots.
2. Product description 2.
DVB-T SD/HD Encoder/Modulator 6 2.2 Installation/Application 3. Operation 1. Screw the encoder modulator where you want to install it. Left 10 cm of free space around from each other once the devices have been installed. 3.1 Button introduction 2. Please connect the cable(s) from the source. The signal source can be from a blu-ray, DVD, SD/HD satellite receiver, CCTV, surveillance monitor, etc. 554912 Encoder Modulator is controlled and managed through the key board and LCD display. 3.
3.2 Management Switch On, then below status will be displayed, few seconds’ initialization then open startup picture.
DVB-T SD/HD Encoder/Modulator 8 3.3 General setting for main menu 1 DVB-T: modulating standard; XX.XXX MHz: the current output frequency; 1080i: video resolution of signal source; X.XX Mbps: the current encoding bit rate. U: symbol of the USB disk insertion. 2 Alarm Status: For example, if the HDMI cable is disconnected, it will display “Video 1 Not Lock” under this menu. 3 Uptime: It displays the working time duration of the device. It times upon power on.
At this moment (recording or playing TS files), the keys has other functions: Play/Pause Back Main Menu 25 Save Config: Yes/No-to save/give up the adjustment of setting. 26 Load Saved CFG: Yes/No-to load/ not to load the saved configuration. 27 Factory Reset: Yes/No-choose/not choose the factory’s default configuration. 28 LCD time-out: A time limit that LCD will light off. Choose among 5s, 10s, 45s, 60s, 90s and 120s (seconds). 29 Key password: Please set the password (six digits: 000000).
DVB-T SD/HD Encoder/Modulator 10 4. TS Creator Software The user can create “.ts” videos containing pictures, music and videos with our “TS Creator” software on a PC and save them into the USB memory. 4.1 Installation 1. Download our TS Creator software to your PC to get the installer and its auxiliary routine. The Ts Creator application support the followings formats: Image: JPG, PNG, BMP, GIF Audio: MP3, WAV Video: WMV, MPG, MP4, TS, AVI 2. If your PC hasn’t installed Net Frame 2.
EN LCN If you want to add LCN please select the “ADD LCN” option. Service ID - Set the same value that was previously edited. Logical Channel Number -Set the LCN value that you want. Visible Service Flag - Please Enable or disable this option. Logical Channel Nunber Length - Please select between 10bit or 14bit. At the end, select the “Add” option 4.3 File Management After finishing the transformation, users can find out the videos files generated according the Saving Directory.
DVB-T SD/HD Encoder/Modulator 12
DVB-T SD/HD Encoder/Modulator 14
EN
televes.
