User`s manual

Optimuss OS User’s Manual
• The selected service will be deleted from your favorites list.
11.8 Moving a service to favorite
• Pressing the Up/Down buttons on your remote control activates the service list.
• Use the navigation buttons up/down to select the desired service and press the Menu button to
open the “Channel list menu”.
• Navigate to the option “enable move mode” and press the OK button.
• Use the navigation buttons up/down to select the service that you want to move and press the OK
button.
• The service will be highlighted red.
• Use the navigation buttons up and down to move the service to the desired position. Press the OK
button to release the service and thus placing it at it’s new position.
• You can move services as long as the move mode is activated. To disable the move mode press the
Menu button to get into the “Channel list menu” and chose the option “disable move mode” by pressing
the OK button.
11.9 Adding a marker to favorites
You have the option to add makers within the favorites bouquets.
• Pressing the Up/Down buttons on your remote control activates the service list.
• You can press the BLUE Options button and select the desired bouquet.
•Select a service. The marker will be added above the selected service.
• By pressing the Menu button the "Channel list menu" will be opened up.
• Navigate to the option "add marker".
• Use the numeric keypad on your remote control to
enter the name for the new bouquet. The according
letters are printed on button.
• Press the OK button to add the marker to your
favorites list. You will be taken back to the "Channel
list menu".
• As an example we have added two markers as
shown in the picture on the left.
• Use the channel up/down buttons to jump
between those two markers.
12. Electronic Program Guide - EPG
The EPG (Electronic Program Guide) displays the detailed program information of each channel, in time
and date order. You can customize your own program guide to list the channels or program of interest to
you and schedule your viewing using the program information.
- 30 -