User`s manual

Optimuss OS User’s Manual
1-6. Standby / Restart
Provides options for power on/off and sleep timer. For more information, please refer to the page 22.
2. SETUP
The Setup menu consists of the following sub-menus.
1. System
2. Service Searching
3. Common Interface
4. Parental Control
5. Factory reset
6. Software management
2-1. Service Searching
: Here you set up the tuners of your Optimuss OS and run channel scanning automatically or manually.
2-1-1. Tuner configuration
: If you run the First Time Installation process (refer to the page 22~23), the Tuner A and B are
already configured. You can check the information of each Tuner and which satellites are scanned by
each Tuner as follows.
2-1-2. Default Channel List
In case there are service lists available for certain satellites, for example, Motorized or fixed (Astra
and Hotbird), you can install the lists in the channel list of your Optimuss OS.
If default service lists are not available, you can run the service scan automatically or manually to
add TV and radio channels to the channel list of your Optimuss OS.
2-1-3. Automatic Scan
: The easiest way to scan services is to use Automatic Scan. In the Automatic Scan menu, there are
two options to choose from as below.
- 39 -