User`s manual

Optimuss OS User’s Manual
1. Open the CrossEPG menu.
2. Select configure and press OK.
3. Make sure you have a USB stick or HDD attached for EPG data storage. Using left & right buttons
set the storage device to HDD or USB. Other settings in this screen can remain as default for the
purpose of this guide.
4. Change scheduled download to once a day as for most users this is enough.
5. Set scheduled download time.
6. Press Red button for back.
7. Select Update rytec providers and press ok.
8. Select Update XEPGDB providers and press ok.
9. Select the EPG source that you want to use for
EPG data. Do not select more than what you
actually use and need as selecting too many will
cause memory issues. For the purpose of this
guide we will select Open TV Providers > highlight
open TV (astra 28.2), press OK to enable this
provider and Green tick will appear.
10. Press Red for Back and keep pressing exit to
exit all screen.
11. Press Blue button > Select crossEPG and press OK. crossEPG will now download EPG data.
Be patient and let it finish then the EPG that you selected will be populated.
12. This should get most peeps started with crossEPG.
13. EPG data will always be saved provided your power down and reboot your receiver in the
correct manner by pressing standby or holding down the standby button on your remote and selecting
restart.
2-2-17. Timeshift Settings
Permanent timeshift is basically automatic timeshift in other words. When you zap to channel X,
receiver automatically starts recording it.
If you decide to switch to another channel, receiver will stop recording previous one and start recording
current channel.
- 54 -