Instruction Manual
-9-
DO’S and Don’ts
ZĞĂĚƚŚĞĨŽůůŽǁŝŶŐƌĞĐŽŵŵĞŶĚĂƟŽŶƐďĞĨŽƌĞƵƐŝŶŐƚŚĞƐƉĞĂŬĞƌ&ŽůůŽǁŝŶŐƚŚĞƐĞLJŽƵǁŝůůďĞ
able to enjoy the product for many years.
gDon’t use abrasive cleaning solvents to clean the speaker.
gDo not expose the speaker to extremely high or low temperature as this will shorten the
ůŝĨĞŽĨĞůĞĐƚƌŽŶŝĐĚĞǀŝĐĞƐĚŝƐƚŽƌƚĐĞƌƚĂŝŶƉůĂƐƟĐƉĂƌƚƐ
gŽŶƚĂƩĞŵƉƚƚŽĚŝƐĂƐƐĞŵďůĞƚŚĞƐƉĞĂŬĞƌĂƐŝƚŵĂLJŐĞƚĚĂŵĂŐĞĚŝĨLJŽƵĂƌĞŶŽƚƉƌŽĨĞƐƐŝŽŶĂů
gŽŶŽƚĞdžƉŽƐĞƚŚĞƐƉĞĂŬĞƌƚŽŚĞĂƚŽƌĮƌĞǀŽŝĚƐƚŽƌĂŐĞŝŶĚŝƌĞĐƚƐƵŶůŝŐŚƚ
gDo not subject the speaker to mechanical shock.
gŽŶŽƚĂĚĚĂŶLJŇƵŝĚƐŽƌƐŽůŝĚƐƚŽLJŽƵƌƐƉĞĂŬĞƌ
gDo not use the speaker if it has been damaged in any way,
dƌŽƵďůĞƐŚŽŽƟŶŐ
No Power
gFirst check to make sure the speaker is plugged in to a live AC outlet.
gMake sure the POWER switch is on.
No Sound
g
Make sure input LEVEL control turned up.
gDĂŬĞ ƐƵƌĞ ƐŝŐŶĂů ƐŽƵƌĐĞŝƐ ǁŽƌŬŝŶŐ ĂŶĚ ƚŚĞ ĐŽŶŶĞĐƟŶŐ ĐĂďůĞƐ ĂƌĞ ŝŶ ŐŽŽĚ ƐŚĂƉĞ ĂŶĚ
securely connected at both ends. Male sure the output volume control on the mixing
console is turned up.
gDĂŬĞƐƵƌĞƚŚĞƉƌĞĂŵƉŽƌŵŝdžĞƌĚŽĞƐŶŽƚŚĂǀĞĂDƵƚĞďƵƩŽŶĞŶŐĂŐĞĚ
Bad Sound - Noise - Humming
gIf the sound is loud and distorted, verify that the levels are set properly on the speaker
and mixing console.
gMake sure allconnectors are secure and they are plugged in to the proper connecter (i.e.,
Mic cable plugged in to MIC input, Line level source plugged in to Line Level Input. ,It is
ĂŐŽŽĚŝĚĞĂƚŽƉĞƌŝĚŝĐĂůůLJĐůĞĂŶĂůůĞůĞĐƚƌŝĐĂůĐŽŶŶĞĐƟŽŶƐǁŝƚŚĂŶŽŶͲůƵďƌŝĐĂƟŶŐĞůĞĐƚƌŝĐĂů
contact cleaner.
gMake sure none of the signal cables are routed near AC cables, power transformers or
other electrical power cords.
gIf humming occurs, turn the LEVEL co ntrol of the speaker all t he way down. If the noise
ĚŝƐĂƉƉĞĂƌƐŝƚƐĐŽŵŝŶŐĨƌŽŵƚŚĞƐŝŐŶĂůƐŽƵƌĐĞ/ĨŶŽƚƚƌLJĚŝƐĐŽŶŶĞĐƟŶŐƚŚĞĐĂďůĞĐŽŶŶĞĐƚĞĚ
to the INPUT jack. If the noise disappears, it could be a gr ound loop, the following ideas:
ŽhƐĞďĂůĂŶĐĞĚĐŽŶŶĞĐƟŽŶƐƚŚƌŽƵŐŚŽƵƚLJŽƵƌƐLJƐƚĞŵĨŽƌďĞƐƚŶŽŝƐĞƌĞũĞĐƟŽŶ;y>ZĐĂďůĞƐ
balanced jacks; RCA cables are not balanced)
o Whenever possible, plug all the audio equipments power cords into the same outlet.
o The hum may appear when using an unbalanced source (CD player, iPod, etc.). You
can use an RCA to XLR adapter to turn an unbalanced cable to a balanced cable.
Ž/ĨƚŚĞŚƵŵƉĞƌƐŝƐƚƐƚƌLJƌĞŵŽǀŝŶŐĐŽŵƉŽŶĞŶƚƐŽŶĞĂƚĂƟŵĞĨƌŽŵƚŚĞďĂĐŬŽĨƚŚĞ
mixer and check each for hum. Reducing the Bass or Treble levels may reduce humming.