Product specifications

3.0 OPERATION GUIDE
3.1 Power on/off
The Car DVR can be turned on by either long-pressing the POWER key or simply
connected it with the car charger to automatically power it on. After power on, the Car DVR
will enter the video mode automatically and start recording if the MicroSD card is already
inserted. The Status LED would start to flash in green color indicating recording. After
switching off the car’s engine (or unplug the car charger from the car DVR), the Car DVR
will record for another 5 seconds and then turn off automatically.
Remark: If there is no SD card inserted, the LCD screen would display "No card" after turn
on.
3.2 Shutdown
To turn off the camera, please long press the POWER key.
Remark: when battery power is insufficient, the screen will show “low battery”, then the Car
DVR will turn off and save the video files automatically.
3.3 Battery charging
There are two charging methods:
1）Charging by USB cable.
2 ) Charging by car charger
Remark: The red POWER LED will be on during charging and the red LED light will be off
when it is fully charged.
3.4 Install and Remove a memory card
Insert the MicroSD card into the MicroSD card slot.
To remove the card, simply push the memory card inside first then it will be ejected out.
Please note that the SD card itself is directional. So please insert it in the correct way.
3.5 Video
Press the POWER key to start and enter into the video recording mode directly. While the
green Status LED flashes, you can press the “OK” key to stop the recording and save the
video file. Then this Car DVR is now under “Standby mode”.