Operation Manual

A
SSMANN Electronic GmbH I Auf dem Schüffel 3 I 58513 Lüdenscheid I Germany
E-Mail: [e-mail] I Internet: www.assmann.com
PAGE 11 USER GUIDE
INSTALLATION
6. Installation
6.1 Necessary parts
First of all, please check the complete product contents of the camera in the original packaging
(see "4 Packaging contents & connection" on page 9)
Furthermore, for installation you will require
Drill for the plug hole
Pencil for marking the drilling holes
Screwdriver
6.2 Installation of the ceiling/wall mounting
• First of all mark the drilling holes by means of the predetermined holes of the ceiling/wall
mounting with a pencil.
Placement of the plugs can be dispensed with if the base is made of
wood. To attach the holder, the supplied screws are subsequently
screwed directly into the base. In order to facilitate the screwing into
wood, the positions should initially be drilled with a 2 mm bit for
example (drilling depth scarcely under screw length).
• Now drill the holes at the marked points and push in the plugs.
• Place the wall holder over the drilled holes and press against the wall, then introduce both
screws and tighten with a screwdriver. To ensure the plastic holder is not damaged, tighten
the screws sufficiently.
• Screw the female thread on the underside of the camera underside to the thread screw of the
mounting and adjust the mounting to the desired angle by means of the lateral locking
screws.