Strip-Cut Shredder S5 Manual 91604
Please carefully read through these operating instructions before using the device for the first time. In particular, please comply with the safety notices. Intended Use: The shredder is only suitable for shredding of paper. Any other use or modification shall be deemed to be improper and involves substantial risk of accidents. Safety notices : 1. Always be sure to keep all loose objects such as e.g. clothing, ties jewellery , hair to avoid injury.
9. Never open the casing to avoid serious injuries, in the event of problems, please consult the vendor location, where you purchased this device or our hotline. 10. The device may not be operated with a damaged power cord to avoid electric shock or short circuit. 11.Clean the drip trays and paper cutter with a slightly dampened cloth and possibly with a mild detergent. Do not spray directly into the feed slot to avoid damages . 12. Please read the manual before operating the machine 13.
2. REV position: Rectifying a paper jam. In this case, the direction of the shredding operation is reversed before the work cycle ends in order to free the shredding blades. Should you determine that too much paper has been inserted and the shredding operation slows noticeably, immediately set the switch to this position, also in the event paper is accidentally inserted. 3.
3. With the switch in the AUTO position and the open feed slot, you may now continue the normal shredding process. Technical data: Shredding type: Size of cut: Shredding capacity: Feed width: Input voltage: Dimensions: Waste basket: Noise level: Strip-cut 7 mm (paper) 5 pages DIN A4 (80g) 218 mm 230-240 volt alternating current, 50 Hz, 0.6 A 321*141*275mm ca. 7 l capacity approx. 74 dB Cleaning: Danger! Unplug the power cord before cleaning.
