Strip-Cut Shredder S7-CD Manual 91605
Thank you for buying this high-quality product. Please carefully read through these operating instructions before using the device for the first time. In particular, please comply with the safety notices. Intended Use: The shredder is only suitable for shredding of paper, credit cards and CDs. Any other use or modification shall be deemed to be improper and involves substantial risk of accidents. Safety notices: 1. Always be sure to keep all loose objects such as e.g.
7. The document shredder must always be deactivated and disconnected from the electrical line prior to moving, transporting and cleaning the device and prior to emptying the waste basket to avoid the danger of injuries. 8. Empty the waste basket frequently. Otherwise the shredder may jam. 9. Please do not leave the document shredder unattended e.g. in the event children or pets are nearby. There is a risk of injury by improper handling. 10.
Starting the document shredder: Important note: This device is designed solely for private use in enclosed quarters and for brief operation not exceeding 2 minutes. Do not use the document shredder for commercial applications nor outdoors. Improper use poses risk of accidents. The sliding switch is located on the top side of the unit and can be set to three (3) positions. 1. AUTO position: the shredding operation starts automatically as soon as the paper to be shredded is inserted in the feed slot.
Separate shredder for CD’s and credit cards: This document shredder is equipped with a separate shredder for CDs/DVDs and credit cards. CDs/DVDs are shredded into 4 pieces. Given that such materials always present the risk of splinters, please keep your face at an acceptable distance when inserting CDs/DVDs. This is in order to avoid serious injuries. The shredded material is then collected in a separate tray thereby facilitating its environmentallyfriendly disposal. Insert credit card: 1.
2. Reconnect the main plug to the AC socket and set the switch to the REV position. Pull the remaining paper away from the shredding blades. Afterwards, set the switch back to the AUTO position. If necessary, repeat this step. 3. With the switch in the AUTO position and the open feed slot, you may now continue the normal shredding process.