Operation Manual

ManualsBrandsEdox ManualsAM60

If your watch has not been used for sev-

eral days, turn the hands until the days

and dates change. At this moment your

watch is set shortly after midnight. It will

then be necessary to still advance the

hands till 6 o’clock. Then you can adjust

the calendar by proceeding in the follow-

ing manner:

a) The moon phases by pressing to the

bottom the push-button No. 1 (opp. 4

o’clock). Advance the disc till full moon

(same position of the moon as shown on

illustration).Youmayjudgeafterwardsby

means of a calendar the number of days

which have passed since the last full

moon and advance the moon disc by the

same number of day.

b)Thedatehandpush-buttonNo.1(opp.

4 o’clock) slight pressure.

c)Thedaysbypush-buttonNo.3(opp.10

o’clock)

From now on you can set your watch to

the correct time.

Important: do not use the push-buttons

No. 1 and No. 3 between 22h00 and

05h00 as it is at that moment that the

automatic change takes place.

The precision tolerance of a Venus move-

ment can be up to 1 minute per day.

4.4 Quartz chronograph

Edox 013, 019, 103

Watch functions:

The crown has 3 positions:

1. Normal position (wearing posi-

tion): when the crown is positioned

against the case, the crown ensures that

the watch is water-resistant.

2. Correcting the date: pull the crown

out to position 2, turn the crown forwards

to turn the hour hand until the desired

date is reached and push it back to posi-

tion 1.

3. Time setting: hours, minutes and sec-

onds. Pull the crown out to position 3. The

seconds hand will stop. Turn the crown

forwards or backwards. Synchronise the

seconds by pushing the crown back to

position 1 to coincide with a given time

signal.

Chronograph functions:

Pusher A: start – stop, start – stop, etc.

Timing to 1/10 of a second for up to

30 minutes (12 hours for the refer-

ence 013).

Pusher B: reset (after a stop)

Accumulated timing chronograph:

Press button A to start. Press button B

after arrival of the ﬁrst “sprinter” – The

time will be indicated. Press button A after

arrival of the second “sprinter” – The time

is memorized. Read the time of the ﬁrst

“sprinter”. Press button B to read the time

of the second “sprinter” (the chronograph

hands will turn at a faster speed until indi-

cation of the time). Press button B to reset

hands to zero.

NB: the hands should be reset to their

original position before the chronograph is

used:

Resetting of the 1/10 seconds hand to

zero: crown in position 3 and pusher B.

Resetting of the 60 seconds hand to

zero: crown in position 3 and pusher A.

Resetting of the 30 minutes hand

(12 hours hand for the reference 013)

to zero: crown in position 2 and pusher B.

Only for reference 013:

Resetting of the 12 hours hand to

zero: crown in position 2 and pusher A.

After setting the hands to their original

positions, return to crown position 1.

Edox 015